buy hypertropin
Home » Archive

Articles in the Align Category

Align, Team Blog »

18 June 2014 | posted by Tim Procter

Going back to my roots with a T-Rex 500 by Tim Procter


Let’s just say I started with one or two of these little gems around 5 or 6 years ago but of course it was the early versioned flybar model which back then also flew pretty good.
My current …

Align, Team Blog »

1 July 2013 | posted by Mattie Lodge

Here is a build review followed by a final thoughts section and a flight test of the NEW Align Trex 700e PRO.

This article consists of 5 section where I will take you through some build photos, explain and show my radio install and finally give my thoughts on the …

Align »

1 May 2013 | posted by Mattie Lodge

Here it is now complete ready to fly. Looks great hey :)

So first flights when very well. A little trimming of the FBL unit needed and also some Gov gain adjustments made in the ESC and I was off to see what this beast can do. First thing I …

Align »

1 May 2013 | posted by Mattie Lodge

MKS 665 Cyclic servos installed. These will be used on a 7.4v HV power system. MKS 669 will be fitted to the tail control

Front 2 servos shown ready for the arms

Spartan Vortex is my FBL unit of choice as can be seen below its neatly installed onto the …

Align »

1 May 2013 | posted by Mattie Lodge

The front tail boxes from Align haven’t changed much over the years so this a pretty standard stuff. What you will notice though is the black slant gears NEW for the PRO version

Rear tail gear box comes preassembled, like everything else it needs taking apart and re-thread locking

Thread …

Align »

1 May 2013 | posted by Mattie Lodge

Onto the Frame build. Out of the box we are presented with 2 side frames which appear pretty strong. What is noticeable is the moulded plastic portions on the forward lower sides. Great idea as this is the clearance for the battery wiring when using the quick release mounting system …

Align »

1 May 2013 | posted by Mattie Lodge

Tidy brown box with the Align logo and description on it. Modern and up to date..

As always you open the box and are greeted with separate boxes containing the individual parts.

For this build I have swapped out the 3GX for a Spartan Vortex VX1 FBL system

So before …